CCNA 2 Module 3 V3.1 Answers
1. Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the modes and interfaces that can be protected with passwords. (Choose three.)
VTY interface
console interface
Ethernet interface
secret EXEC mode
privileged EXEC mode
router configuration mode
2. Which command sequence will permit access to all five router virtual terminal lines with a password of cisco?
Router(config-line)#config telnet
Router(config-line)# line vty 0 5
Router(config-line)# password cisco
Router(config)# line vty 0 4
Router(config)# password cisco
Router(config)# line vty 0 4
Router(config-line)# password cisco
Router(config-line)# login
Router(config-line)# config telnet
Router(config-line)# password cisco
Router(config-line)# sessions 0 4
CCNA 2 Module 2 V3.1 Answers
1. Which keystrokes can be used to return to the privileged mode from the interface configuration mode?
Ctrl-P
Ctrl-Shift-6, then X
Ctrl-Z
Esc
2. Which connection method can be used to perform the initial configuration of a router?
use a serial connection of a computer connected to the console port of a router
telnet to the router through a serial port
use a vty port through the Ethernet interface
use a modem connected to the AUX port of the router
CCNA 2 Module 1 V3.1 Answers
1. Which of the following devices are used in the construction of a WAN? (Choose three.)
hubs
routers
communication servers
transceivers
modems
multi-port repeaters
2. Which basic components do a router and a standard desktop PC have in common? (Choose three.)
CPU
hard drive
input/output interfaces
keyboard
monitor
system bus
CCNA 1 Practice Final Exam Answer V3.1
1. When a network administrator applies the subnet mask 255.255.255.248 to a Class A address, for any given subnet, how many IP addresses are available to be assigned to devices?
1022
510
254
126
30
6
2. What is the maximum distance that 10BASE-T will transmit data before signal attenuation affects the data delivery?
100 meters
185 meters
300 meters
500 meters
CCNA 1 Final Exam Answers V3.1
1. A router determines the path to deliver a packet. What layer of the OSI model does this fact represent?
session
transport
network
data link
physical
2.
Refer to the exhibit. A network administrator has configured a network after subnetting the network number 192.168.0.0/28. Workstation 1 is not able to communicate with Workstation 2. What is the cause of this loss in communications?
Workstation 1 and Workstation 2 are on the same subnet.
The serial connections are using addresses from the LAN subnets.
Workstation 1 is not on the same network that the Router 1 LAN interface is on.
If routers are used in the network, IP addresses do not need to be subnetted.